100W Wet Location Emergency Light with 50W Lamps

Product Description

If your outdoor facility needs a lot of light shining down on the escape path, allowing visitors to safely navigate obstacles during a power outage, we may have just the outdoor egress fixture for you - the 100W Wet Location Emergency Light with 50W Lamps! The IEL-Series is a wet location-ready fixture ideal for outdoor areas exposed to rain and direct sunlight, and is available with several options including Battery Heater and Autotest functions.

The IEL-12-120-2LR-50SB includes two (2) top-mounted  50-watt sealed beam halogen, Par36-style heads. These heads are fully-adjustable, water-tight and project up to 1900 lumens of pure-white light onto your egress pathway!

For areas with an abundance of HID sportslighters and floodlights, the Time Delay (TD) option can be factory set to stay on for a desired duration (5,10 or 20 min) allowing HID lighting to fully warm up.

Construction

Our IEL-12-54-NC-2-25SBH is constructed with a fiberglass cabinet that is resistant to corrosion and sun-damage. An industrial gray finish is standard, and there are several terminal connectors on the housing flanks to connect remote flood lights. 

Each IEL-12-54-NC-2-25SBH model is individually tested in the factory to NEMA 4X standards, a series of brutal wash-down tests to ensure the gaskets and housing stay completely sealed. This makes it a far superior unit than most fixtures which only carry a UL/CSA Wet Location listing.

Battery Testing

This Wet Location Emergency Light comes with two (2) maintenance free 12 volt sealed valve regulated lead acid batteries. These batteries are rated to maintain a 100W load for at least 90 minutes, and requires only 48-hours to fully re-charge. Typical threshold of the battery is 50°F, but by selecting the Internal Battery (IH) option your temperature range increases tos -4°F, making it ideal for snow and icy conditions, or in any climate that dips below 40°F in the wintertime.

For periodic CSA-mandated testing, a push-to-test switch on the side of the housing allows maintenance personnel to quickly ascertain the operational status of the fixture and lamp load. Above the switch is a dual diagnostic LED display indicating AC/ON and High Charge. 

You can save maintenance dollars by selecting the Autotest (AT) feature, which constantly monitors the status of the battery voltage, input voltage, lamps, battery and switching circuitry. Autotest will also perform a 30-second test monthly and a 90-minute discharge every six months, per code

Lead Time and Shipping 

Our NEMA 4X emergency lights are built-to-order in Ontario, Canada. Expect a 1-2 week lead time (3-4 weeks for 10 or more fixtures). However, this model may be in-stock at any time. Please call 800-282-5600 to get the most accurate delivery quotation.

Features 

• Rugged fiberglass housing with a gray finish.
• Two (2) top-mounted adjustable 50W sealed beam halogen Par36 lamp heads.
• CSA Listed to UL 924, BAA, NEMA 4 & 4X, and complies with ARRA and NEC, Life Safety Code standards.
• Dual primary 120 or 277 VAC operation.
• High efficiency stage charger provides precise float voltage.
• Temperature compensated circuits.
• Perfect for HID Lighting! Time Delay keeps the fixture ON after AC power is restored.
• Two (2) maintenance-free 12V Sealed Lead Acid batteries included.
• Includes push-to-test switch and charge rate / power indicator.
• Puts out 90 minutes of emergency light.

Specifications