12V 60W Industrial Class 1 Division 2 Emergency Light

Product Description

An OSHA compliance officer walked through your fabrication shop recently and dinged you for improper emergency lighting outside the paint spray booth. The current lights have been out of commission for a while, as well as a few exit signs and remote floodlights that relied on the primary battery unit for backup power. What can you replace them with that's under $1000?

We suggest you Buy the EXP-12-60-MR16-10W, a C1D2 fixture that also has extra juice to power your exit signs or other remote fixtures. The 12V 60W Industrial Class 1 Division 2 Emergency Light uses dual (2) 20W Halogen MR16 heads which can be hand positioned to meet your escape pathway needs. Best of all, halogen produces a bright light with a slightly warm color temperature that cuts through dust and smoke better than pure-white light sources like LED.

Construction 

Our sleek and stylish EXP-12-60-MR16-10W is fabricated with a .100" thick heavy die cast aluminum back housing, which we then powder coat with an industrial gray baked-on finish. 

A clear polycarbonate lens protects the lighting heads and other components within from impact. To meet NEC and OSHA protocols for Class 1 Div. 2 spaces, a memory retention gasket protects the inside cavity from explosive shavings, dust, gases and vapors.

Battery and UL Testing

The 12V 60W Industrial Class 1 Division 2 Emergency Light includes a 12V maintenance-free Sealed Lead Acid battery that maintains a 60W load rated for at least 90 minutes. The SLA battery requires only 48-hours to fully re-charge. For freezers or any location that dips below 40° F, please choose the Internal Heater (IH) option which brings the operability range as low as -4° F.

A push-to-test button behind the polycarbonate lens allows you to quickly ascertain the operational status of the fixture and lamps. Above the button is a dual diagnostic LED display indicating AC/ON and High Charge. To greatly reduce maintenance costs, choose the Autotest (AT) option, a microprocessor that constantly monitors the lamps, battery and circuits. AT also performs all UL-diagnostics for you!

Features

• Suitable for Class I, Division 2 Environments. Groups A-D.
• T3A Temperature Code.
• NEMA 4X and IP66-rated.
• Heavy duty cast aluminum housing with industrial gray powder coat finish.
• Clear vandal-resistant polycarbonate lens.
• Two (2) front-mounted adjustable 20W Halogen MR16 lamp heads.
• Fully gasketed enclosure protects from explosive gas and dust.
• CSA Listed to UL 924, ETL Listed to ANSI / NSF Standard #2, NEMA 4X and IP66 rated.
• Dual 120/277VAC input.
• High efficiency 2-stage charger provides precise float voltage with low volt disconnect.
• Operating temperature is 50°F to 104°F
• 12 Volt Sealed Lead Acid (SLA) battery.

Specifications