Class I & II Division 1 & 2 Explosion Proof CFL Emergency Light

Product Description

As the Plant Manager of a chemical refinery, you need to replace a few standby emergency globe fixtures in Hazardous Areas of your facility.  You also want these battery backup lights to hang from the ceiling on pre-existing pendant stems to reduce labor costs. Your troubles are over with our Class I & II Division 1 & 2 Explosion Proof CFL Emergency Light.

The SXPJ26-F-U-GG-P-EMO is a versatile harsh location fixture, tested to the highest UL and ETL standards for highly corrosive, wet environments with high concentrations of explosive chemical vapour. It stays off during normal hours when AC power is flowing, and activates when a power failure is detected in the circuit

Construction

The ballast housing, outlet box and lens retaining ring on the SXPJ26-F-U-GG-P-EM) is constructed with corrosion resistant aluminum with a white baked-on powder epoxy for increased protection against salt water. It features external and internal heat dissipation fins that maintains internal components in ambient temperatures as high as 104°F. This model includes a 3/4" pendant mounting bracket for ceiling installation.

To protect and seal the lamp inside, our Class I & II Division 1 & 2 Hazardous Location CFL Light with Emergency Backup has a heat resistant internally prismatic glass globe which provides a full 360° lighting pattern. An electro-polished stainless steel wire guard provides added protection to the lamp and globe. The lamp can be accessed via a gasketed double-lead threaded screw-on globe ring.

Light Source

The SXPJ26-F-U-GG-P-EMO utilizes a 26W 4-Pin compact fluorescent lamp (not included). 

Emergency Ballast

In the event of an emergency power failure, the SXPJ's low-voltage detection will trigger the emergency ballast, maintaining the AC ballast and connected compact fluorescent lamp for no less than 90 minutes.

The housing includes a sealed LED indicator light/test switch for performing scheduled maintenance.

Features

• Suitable for Class I & II, Division 1 & 2 Environments.
• Heat dissipating aluminum housing with white powder coat epoxy finish.
• Gasket-sealed, screw-on prismatic glass lens.
• T8 Rated for 104° F ambient temperatures.
• Emergency Only.
• UL924 Listed.
• UL844 Listed for Hazardous Locations
• IP66 Rated and NEMA 4X Listed.
• For 26W CFL  (not included).
• Fully gasketed enclosure protects from explosive gas and dust.
• Dual 120/277VAC input.
• UL924 listed battery pack with LED indicator/test switch.

Specifications