Explosion Proof Emergency Light

Product Description

The Class 1 Division 2 Emergency Light is hazardous location rated and suitable for use in locations which require explosion-proof emergency lighting fixtures. It comes with (2) 5W Halogen MR16 lamps that are fully-adjustable and a nickel-cadmium battery pack. If you have specific questions or would like a price quote and shipping estimate, please call us at 800-282-5600 to speak with an expert right now. We have all the technical data and other information you might need available, including photometric output.

It's high time to update the emergency lighting outside of your paint spray booth. While this area is not deemed an explosive environment, NEC Code requires you to have a Class 1 Division 2 fixture outside that is sufficiently protected in case a spill or other situation occurs. It may seem like overkill in an otherwise non-hazardous environment -- but think again.

In these situations, a tiny spark from a circuit board - like the ones inside unprotected exit lighting - could ignite a huge explosion. So the best way to stay safe without breaking the bank is our long-life Class 1 Division 2 Emergency Light.

Construction

Our sleek and stylish EXP-6-18-MR16-5W is constructed with a .100" thick heavy die cast aluminum back housing, which we then powder coat with an industrial gray baked-on finish. 

A clear 0.125" thick polycarbonate lens protects the lighting heads within from vandalism and impact. To meet NEC and OSHA protocols for Class 1 Div. 2 spaces, a memory retention gasket protects the inside cavity from dust, moisture or water intrusion.

The EXP-6-18-MR16-5W uses dual 5W Halogen MR16 heads which can be hand positioned by first removing the polycarbonate shield. Halogen produces a bright light with a slightly warm color temperature that cuts through dust and smoke better than pure-white light sources like LED.

Battery and UL Testing 

The EXP-6-18-MR16-5W includes a 6V maintenance-free Sealed Lead Acid battery that maintains a 18W load rated for at least 90 minutes. The SLA battery requires only 24-hours to fully re-charge. There is also the option for Nickel-Cadmium batteries which have a longer lifespan than SLA types.

Because Ni-Cd batteries are much lighter than Lead Acid type, the shipping costs will be a significantly less than the equivalent SLA model. Ni-Cd battery replacements are typically cheaper to buy, and last up to three years longer than 6V sealed lead acid blocks. 

Features

• Suitable for Class I, Division 2 Environments. Groups A-D.
• T3A Temperature Code.
• NEMA 4X and IP66-rated.
• Heavy duty cast aluminum housing with industrial gray powder coat finish.
• Clear vandal-resistant polycarbonate lens.
• Two (2) front-mounted adjustable 10W Halogen MR16 lamp heads.
• Fully gasketed enclosure protects from explosive gas and dust.
• CSA Listed to UL 924, ETL Listed to ANSI / NSF Standard #2, NEMA 4X and IP66 rated.
• Dual 120/277VAC input.
• High efficiency 2-stage charger provides precise float voltage with low volt disconnect.
• Operating temperature is 50°F to 104°F.
• 6 Volt Nickel Cadmium (Ni-Cd) battery pack is included.
• Includes stainless steel straps for surface mounting. 

Specifications