Product Description
On the hunt for unobtrusive backup emergency lights to install in your shopping mall promenade? Need intense bright escape pathway lighting? Buy our Flush Mount Recessed Emergency Light with NiCad Battery, a fuly recessed exit light that can mount inside your wall or ceiling.
When AC power is flowing, the halogen MR16 lighting heads are kept retracted behind a hinged steel door, which disappears into your wall or ceiling surface. When a power failure strikes, the door will swing open, and the dual lighting heads "reveal" themselves to provide 90 minutes of escape lighting.
Construction
The RTN70-2(20) consists of two compnents: (a) an unfinished steel backbox which contains the battery & circuitry and can be concealed into the wall; (b) the lighting box with an exposed flat door and frame. The door and frame are sprayed with a textured off-white powder coat finish which protects the metal from corrosion and discoloration.
Illumination
This commercial-grade architectural recessed battery unit has two (2) 20W halogen MR16 lamps which can be positioned to illuminate your path of egress. These lighting heads are very bright and project a lighed pathway on 2 axis, so these commercial grade trap door emergency lights can be spaced very far apart
Battery
The RTN70-2(20) includes a 12-volt Nickel Cadmium (Ni-Cd) battery pack which lasts up to fifteen years and has a wider temperature threshold than SLA and lead calcium types.
This battery provides 30-watts of additional battery capacity so you can power a single (1) additional halogen remote floodlight.
Features
- Ideal for new construction, in wall cavities or un-insulated ceilings with horizontal trusses or T-bar grids.
- CSA Listed to UL924 Standards.
- Galvanized steel backbox with corrosion resistant powder coat finish.
- Two (2) concealed 20W halogen MR16 heads.
- 30W of additional battery capacity for powering one (1) remote head.
- Includes 12V Nickel Cadmium battery.
- Includes electrical J-box and can be installed to a wall stud or ceiling beam.
- Sealed push-to-test switch and LED pilot light accessible through exposed frame.
- Dual 120/277VAC input.
- Made in the USA.
Specifications
| Width: | 9.15" | Diagnostics: | Manual | |
| Height: | 17.56" | Light Source: | Halogen | |
| Depth: | 5.25" | Lamp Heads: | (2) 20W MR16. | |
| Weight: | 30 lbs | Power Consumed: | 70W | |
| Warranty: | 3 Years | Voltage: | 120/277VAC | |
| Mount Type: | Recessed wall and ceiling. | Codes & Standards: | CSA Listed to UL 924, NEC, NYC Approved, IBC. |
Other Details
Any component that fails due to a manufacturing defect is guaranteed for 3 years with a separate, pro-rated warranty on the battery. The warranty does not cover physical damage, abuse or acts of God. Manufacturer reserves the right to charge for such repairs if deemed necessary.Product Videos
Custom Field
