High Capacity NEMA 4X Waterproof LED Emergency Light

Product Description

If you're looking to update the emergency lighting in your food processing facility, get the energy-saving High Capacity NEMA 4X Waterproof LED Emergency Light! This sleek battery unit is NSF Rated and provides effective pathway lighting via adjustable 5W LED MR16 heads, with 50 watts of extra juice you can use to light other fixtures, exit signs or remote floodlights. The EXT-12-60-LED-MR16-5W is the highest capacity battery backup model in the BRV Series.

Construction

The EXT-12-60-MR16-5W is built with a .100" thick heavy die cast aluminum rear housing that is powder coated with a corrosion-blocking industrial gray finish. The battery has the capacity to connect up to ten (10) equal remote lamps, which can be hooked-up via sturdy terminal connectors on the sides of the unit.

Protecting the 5W LED MR16 lighting heads is a  clear 0.125" thick polycarbonate face shield that is highly resistant to vandalism. To meet NEMA 4X and IP66 testing requirements, a memory retention gasket protects the inside cavity from dust, moisture or water ingress. To prevent tampering, stainless steel hex screws are supplied which can only un-fasten using a special bit (included)

This High Capacity NEMA 4X Waterproof LED Emergency Light mounts to just about any inflammable wall or ceiling surface via an adaptable mounting pattern and key hole slots cast into the mounting backplate. Stainless steel straps are also included to aid surface mounting.

Battery and CSA Testing

The EXT-12-60-MR16-5W includes a 12V maintenance-free Sealed Lead Acid battery that maintains a 60W load rated for at least 90 minutes. The SLA battery requires only 48-hours to fully re-charge. For freezers or any location that dips below 40° F, please choose the Internal Heater (IH) option which increases the operability range to -4° F.

To maintain the battery's 5-7 year expected life span, a discharge test should be performed at monthly and bi-annual intervals. This is accomplished by pressing the push-to-test button behind the polycarbonate lens. This allows maintenance personnel to monitor the operational status of the fixture and lamp loads. Above the button is a dual diagnostic LED display indicating AC/ON and High Charge. And don't forget to ask about our Auto-test (AT) option!

Features

• Heavy duty cast aluminum housing with industrial gray powder coat finish.
• Clear vandal-resistant polycarbonate lens.
• Two (2) front-mounted adjustable 5W LED MR16 lamp heads.
• 60W capacity for powering an ten (10) additional 5W LED remote head!
• Fully gasketed enclosure protects from moisture ingress.
• CSA Listed to UL 924, ETL Listed to ANSI / NSF Standard #2, NEMA 4X and IP66 rated.
• Dual 120/277VAC input.
• High efficiency 2-stage charger provides precise float voltage with low volt disconnect.
• Operating temperature is 50°F to 104°F
• 12 Volt Sealed Lead Acid (SLA) battery is included.
• Includes stainless steel straps for surface mounting.
• Includes push-to-test switch and charge rate / power indicator.
• Ideal for food service splash zone environments.

Specifications