Product Description
As the facilities manager of a Veterans Affairs Hospital, your goal is to find high-visibility exit signs to place in the lobby, wards and hallways. These signs must be very durable for areas with high foot traffic, and must be visible through thick smoke. What kind of fixture can do all that?
The answer is our Steel Direct View Exit Sign Green LED, a health care grade battery backup fixture. Instead of concealing a single LED light strip inside the housing like normal exit signs, the G60-NC-WH displays its non-diffused, high-output LEDs in a pattern that reads 'EXIT'. This gives the direct view sign a visibility far beyond the 100-ft minimum required by UL924 emergency lighting standards, making it the brightest egress marker in existence!
Construction
The G60-NC-WH is constructed with a rugged 20-gauge steel housing which is powder coated with a baked-on white finish. A 1/8" thick vandal-resistant polycarbonate lens protects the exposed LEDs. This sign is manufactured and assembled in the United States.
This Steel Direct View Exit Sign Green LED features bright green Light Emitting Diodes arranged to spell 'EXIT' in legal 6" letters. Knock out directional chevrons allow you to point right, left or right/left. The 60-NC-WH includes a mounting canopy and hardware for ceiling, flag or flush wall mount installation.
Battery
This G60NC model includes a maintenance-free, Nickel Cadmium (Ni-Cd) battery pack. It provides emergency backup power to the exit sign for at least 90 minutes, and only requires 48-hours to fully recharge. Ni-Cd is the longest lasting battery type available, lasting an average of 15 years.
A push-to-test switch and LED pilot light on the side of the exit sign housing allows you to test the emergency readiness of the fixture. The LED will flash if any fault is detected in the circuit, LED lights or battery.
Features
- Rugged 20-gauge steel housing.
- Baked-on white powder coat finish is resistant to damp locations.
- High visibility green LED legend can be seen over 100 feet away!
- Protective polycarbonate lens shield.
- Knockout directional chevrons.
- Dual primary 120 or 277 VAC operation.
- ETL listed to UL924 Standards.
- Includes long-life Nickel Cadmium (Ni-Cd) battery pack.
- Push-to-test switch and LED pilot light for manual diagnostic.
- Self-testing versions available upon request.
- Fully automatic solid-state, two-rate charger.
- Assembled in America.
Specifications
Width: | 12.37" | Diagnostics: | Manual | |
Height: | 9.25" | Light Source: | LED | |
Depth: | 2.75" | Lamp Heads: | None | |
Weight: | 10 lbs | Power Consumed: | 4.4W | |
Warranty: | 3 Years | Voltage: | 120/277VAC | |
Mount Type: | Universal | Codes & Standards: | ETL to UL924, UL Damp Listed, NEC, NFPA 101. |